• +605 249 0500
  • enquiries@qiup.edu.my

Prof. Ir. Dr. Shuib Sahudin

Professor and Deputy Dean,
Faculty of Science and Technology

Qualifications:

  • PhD. (Management), 2016
    Management and Science University (MSU), Malaysia.
  • MSc (Mechanical Engineering), 1988
    University College of Swansea, Wales, United Kingdom.
  • BSc (Mechanical Engineering), 1986
    Sunderland University, England, United Kingdom.
  • Diploma in Mechanical Engineering, 1978
    University Technology Malaysia (UTM), Malaysia.

Professional Qualifications / Membership:

  • Dredgemaster Certificate of Competency issued by Machinery Department, Ministry of Human Resource Malaysia, Kuala Lumpur. (Professional Certificate of Competency as a Chief Dredge Engineer). Certificate No: 023 / 81 (1981)
  • Registration with Institution of Engineers, Malaysia (IEM) – as a Fellow Member, Membership No: F 11991. Membership FIEM. (OCT 2004)
  • Registration with Board of Engineers, Malaysia (Lembaga Jurutera Malaysia) – as Professional Member (P. Eng). Branch / Section: Mechanical Engineering. Professional Engineer Registration No: C112181. (2004)
  • International Membership: APEC Engineer. Dicipline: Mechanical. Registration No: MY A 00204. APEC Eng.(2006)
  • International Membership: International Professional Engineer. Discipline: Mechanical Registration No: MY E 00204. IntPE (MY). (2006)
  • Malaysian Society of Engineering and Technology (MySET) – as a Corporate Member Discipline: Mechanical. Registration No: MS00717 (2012). (M.M.S.E.T : 00717).

Research Interest

Involved as a Principal Researcher and as a member in several research groups;

  1. Development of Integrated CAD/CAM System for Cold Forging Die Design Process”, ( Long term grant, RM265,000.00)
  2. Computer Vision”, (Short term grant, RM18000.00).
  3. A Study of Machining Capabilities of Ceramic Cutting Tool Bits Produced by Friction Welding” , ( Short Term grant, RM20,000.00).
  4. Development of Integrated CAD/CAM System for Cold Forging Die Design Process”, ( Long term grant, RM265,000.00)
  5. Development of Integrated CAD/CAM System for Cold Forging Die Design Process”, ( Long term grant, RM265,000.00)
  6. Analysis of Flow and Solidification of Casting Process”,       (Short term grant, RM 39, 300)
  7. Engineering and Engineering Technology Gap Analysis”, (Short Term Grant, RM8,000.00)
Teaching and Industry Experience

March  2018 to date :

Working as Professor at School of Engineering (SoE) and Deputy Dean of Faculty of Science and Technology (FST), Quest International University Perak (QIU), Perak, Malaysia.

Job Responsibilities:

  1. As Lecturer and Professor in School of Engineering, QIUP, Perak, Malaysia: Involved in teaching; Engineering Dynamics. Faculty of Science and Technology (FST), Quest International University Perak (QIUP), Perak.
  2. As Deputy Dean, School of Engineering (SoE), Faculty of Science and Technology (FST):Involved in managing the overall engineering programmes, including the daily operation, planning, managing and development of the faculty staffs and infrastructure for School of Engineering.
  3. Helping university in liaison with Engineering Accreditation Council (EAC), Board of Engineers, Malaysia (BEM), Malaysian Qualifications Agency (MQA), Ministry of Higher Education (MOHE), Institution of Engineers, Malaysia (IEM). 

 

December 2010 to  February 2018 :

Working as Associate Professor at School of Environmental Engineering, University Malaysia Perlis (UniMAP), Perlis, Malaysia.

Job Responsibilities:

  1. As Lecturer and Assoc. Professor in Manufacturing Engineering School, UniMAP (August 2015 to date): Involved in teaching; Engineers in Society, Engineering Mechanics and Mechanics of Materials, and Integrated Design Project. As a leading staff in Engineering Education, Outcome Based Education (OBE) and Quality Education.
  2. As Director, Quality and Accreditations Unit (UNIKA), UniMAP (Dec 2010 to Feb 2014):As a Director in managing the overall UNIKA Department, including the daily operation, planning, managing and development of the staffs and infrastructure of UNIKA Department. As a Director, responsible to Academic Quality Assurance including accreditation of all engineering programmes (eight engineering faculties and fifteen engineering programmes). Assisting Engineering Faculty in setting-up new academic programmes especially in helping the faculty in maintaining good quality of academic curriculum.
  3. UNIKA also as a liaison department with Malaysian Qualifications Agency (MQA), Engineering Accreditation Council (EAC), Ministry of Higher Education (MOHE), Institution of Engineers, Malaysia (IEM), Board of Engineers, Malaysia (BEM) and Federation of Malaysian Manufacturers (FMM) for Kedah / Perlis Branch.
  4. As Lecturer and Assoc. Professor in Environmental Engineering School, UniMAP (Dec 2010 to Aug 2015).Involved in teaching; Engineers in Society, Engineering Mechanics and Mechanics of Materials, Construction Management and Integrated Design Project. As a leading staff in Engineering Education, Outcome Based Education (OBE) and Quality Education.

April 2009 to  August 2010:

As Associate Professor at Manufacturing Engineering Faculty, University Malaysia Pahang (UMP), Pahang, Malaysia. Also appointed as Deputy Director, Centre of Academic Innovation & Competitiveness (CAIC), UMP. 

Job Responsibilities:

  1. As Lecturer and Assoc. Professor in Manufacturing Engineering Dept. UMP: Involved in teaching several engineering courses; Engineering Materials, Engineering Statics and Engineering Dynamics. Involved in designing and curriculum development of Manufacturing Engineering programme, Mechatronics Engineering programme and Mechatronics Engineering programme (German Model, HsKA – 9 Semester). Helping setting-up Mechanics Engineering laboratories. As a leading staff in Outcome Based Education (OBE).
  2. As Deputy Director, Centre of Academic Innovation& Competitiveness (CAIC), UMP: Helping the Director in managing the overall CAIC Department, including the daily operation, planning, managing and development of the staffs and infra structure of CAIC Department. As Deputy Director,  responsible to Academic Quality Assurance including academic programme accreditation, Draft of Academic policy, ISO of Teaching & Learning (T&L) and International academic programme recognition.

Also responsible to Academic Development including development of new academic programme, market survey, expert panel, curriculum review, development of new engineering faculty, innovation and creativity in Teaching & Learning.

Sept 2006 to March 2008:

As a Lecturer in School of Mechanical Engineering, University Science Malaysia (USM), Engineering Campus, Penang.

Job Responsibilities:

As Lecturer in School of Mechanical Engineering, USM: Involved in teaching several engineering subjects; Manufacturing Technology II, Industrial Engineering and Manufacturing Technology Laboratory.  Involved as a leading staff in Outcome Based Education (OBE) of Engineering Campus of USM.

Committee involvement

ENGINEERING ACCREDITATION COUNCIL (EAC – BEM) 

I was appointed by EAC as one of the Accreditation Panel Members; as Head of Accreditation Programme, Deputy Head of Delegation and as Representative of Director Engineering Accreditation Department (EAD).

  1. Appointed as Head of Panel to accredit for Continuing Cycle Bachelor of Engineering with Hons. In Mechanical Engineering programme, University Technology Petronas (UTP), Seri Iskandar, Perak. 09 June 2015.
  2. Appointed as Head of Panel to accredit for New Programme Bachelor of Mechanical Precision Engineering (MPE)programme, Malaysia-Japan International Institute of Technology (MJIIT), University Technology Malaysia (UTM), 24&25 June 2015.
  3. Appointed as Head of Panel to accredit for New Cycle Bachelor of Mechanical Engineering (MECH) programme, Multimedia (MMU) Melaka Campus, Melaka, 20&21 March 2016.
  4. Appointed as Head of Panel to accredit for New Cycle Bachelor of Mechatronic Engineering programme, Kolej University Tunku Abdul Rahman (TAR UC), Kuala Lumpur, 21&22September 2016.
  5. Appointed for Interim Visit as Head of Panel to accredit Mechanical-Aeronautics Engineering programme, Universiti Teknologi Malaysia (UTM), Johor Baharu. 06 December 2016.
  6. Appointed for Head of Panel to accredit for Continuing cycle the Mechatronic Engineering programme, Tunku Abdul Rahman College (KTAR), Kuala Lumpur. 03October 2017.

 

ENGINEERING TECHNOLOGY ACCREDITATION COUNCIL (ETAC- BEM) 

The role of Engineering Technology Accreditation Council (ETAC), Malaysia is to evaluate and accredit the engineering technology programmes of Institution of Higher Learning (IHL) and University. Engineering Accreditation Council (ETAC) is a subsidiary of Board of Engineers, Malaysia (BEM).

I was appointed by ETAC as one of the Accreditation Panel Members or Assessor.  The accreditation visits:

Appointed as ETAC Panel Member to accredit for new programme, Bachelor of Mechanical Engineering Technology (Automative), University Tun Hussein Onn Malaysia (UTHM), Johor.23&24 October 2017.

 

MALAYSIAN QUALIFICATIONS AGENCY (MQA)

I was appointed by the MQA as one of the Auditor Panel Members (Panel Penilai Agensi Kelayakan Malaysia) for Malaysian Qualifications Agency. The role of MQA is to evaluate and audit academic programmes of Institution of Higher Learning (IHL) and University. The MQA is a subsidiary of Ministry of Higher Education (MOHE), Malaysia. Appointment from 2015 till 01 October 2020. The allocated disciples are Mechanical, Environmental, Manufacturing and Mechatronic Engineering.

Appointed by MQA to audit:

  1. The International Islamic University   International Islamic University of Malaysia (IIUM/UIAM), Gombak, Kuala Lumpur, for Post Graduate programmes (Kulliyyah of Engineering and Kulliyyah of Architecture & Environmental Design), September 2013.
  2. Appointed as Assessor Panel for Malaysia Quality Evaluation Systems for Private Colleges (MyQUEST), Ministry of Higher Education (MOHE), Malaysia, for 2014 to 2015.
  3. Appointed as Head of Panel to accredit for New Cycle Bachelor of Engineering Technology (Energy & Environmental) programme, University Malaysia Pahang (UMP), Kuantan, Pahang. 06 & 07 June 2016.
  4. Appointed as Assessor Panel for Compliance Audit Requirements Post Graduate Programmes Public Universities, Universiti Malaysia Sarawak (UNIMAS), Sarawak. Expected visit in April 2018.

 

REVIEW OF ENGINEERING PROGRAM ACCREDITATION MANUAL 2012 (PROPOSED REVISED EAC MANUAL 2016& 2017)

I was appointed as Member to Review the Engineering Programme Accreditation Manual 2012 (Proposed Revised Version 2016 & 2017) on 15 & 16 October 2016 at Grand Dorsett Hotel, Subang Jaya, Selangor, Malaysia.

Also second workshop to Review the Engineering Programme Accreditation Manual 2012 (Proposed Revised Version 2016) on 05 December 2016 at Marriott Putrajaya Hotel, Selangor.

 

INSTITUTION OF ENGINEERS, MALAYSIA (IEM)

  1. Elected as an Internal Auditor of IEM State of Perak Branch starting from Session 2004 to 2009, and from Session 2011 to date:
  2. Member of Standing Committee on Examinations & Qualifications (Q&A), IEM Head Quarters, Petaling Jaya, Selangor starts from Session 2006 to 2012. Member  of Standing Committee on Examinations and Qualifications (E&Q), IEM Head  Quarters, from 2013 to date.
  3. Appointed as IEM Accreditation Board Committee Member, IEM Head Quarters, Petaling Jaya, Selangor. From Jan 2012 to date.
  4. Appointed as IEM Board of Examiner Committee Member, Petaling Jaya, Selangor. From Nov 2014 to date.
  5. Member of Executive Committee (EXCO) of IEM Eastern Branch (Kelantan & Pahang) and as a Treasurer of IEMEastern from Session 2009/2010 to 2010/2011.
  6. Appointed as a Principal Interviewer and Second Interviewer of the Professional Interview (PI) for member of the IEM. From 2007 to date.
  7. As a IEM Mentor for candidate undergo industrial attachment and training to become Professional Engineer (PE).

 

AS PRINCIPAL INTERVIEWER OF THE PROFESSIONAL INTERVIEW FOR MEMBER OF IEM

  1. Shahrul Nizam b. Ahmad Sharudin – 14 Dec 2007
  2. Rodzi bin Abu Seman  – 14 Sept 2009
  3. Mohd Adha bin Mat Esa   – 19 Nov 2009
  4. Zulkefli bin Mat Sain – 22 Feb 2010
  5. Abu Hashim bin Abdul Rahman  – 04 Aug 2010
  6. Mohd Yunus bin Harun  – 08 Feb 2011
  7. Mohd Nasir bin Mohd Isa–27 April 2017
  8. Ahmad Faizul bin Yusop–16 May 2017

 

MALAYSIAN SOCIETY FOR ENGINEERING AND TECHNOLOGY (MySET)

  1. Elected as Standing Committee on Examination, Accreditation & Certification (AEAC) from Session 2011 to 2016.
  2. Elected as Standing Committee on Professional Engineering Technologist & Technician (PETTC) from Session 2012 to 2014.
Publications
  1. The Effect of Corner Radii and Part Orientation on Fatique Life of Closed – Forging Die”, Khaleed Hussain M.T, Zahurin Samad, S. Sahudin, A.R. Uthman, A.B. Abdullah, Journal of Applied Sciences 7(19) : 2871-2875, 2007.
  2. The Analysis of Stress Concentration Factor in Bolted Joint Using Finite Element Method”, Khaleed Hussain M.T, Zahurin Samad, S. Sahudin, A.R. Uthman, A.B. Abdullah, International Journal of Mechanical and Materials Engineering(IJMME ) 3 (2008), No.1, 38 – 45.
  3. Development of Malaysian Machine Tools Industry –  A Proposed Scenario”, Aznijar Ahmad Yazid, Shuib Sahudin, Indra Putra Almanar, Eleventh AUN/SEED-Net Fieldwise on Manufacturing Engineering Conference, Kuala Lumpur, 2007.
  4. Numerical Analysis To Optimize The Cold Forging Die Design”, A. R. Ab-Kadir,  A. R. Othman , Z. Samad , S. Sahudin, Khalid H.M.T, A. B. Abdullah.
  5. MatingInterface Methods of Assembled Modules in Reconfigurable Machine Tool”, Maideen N.C., Almanar I.P., S. Sahudin, Ali, A.Y., 2nd Asia Pacific Conference on Manufacturing System(APCOMS 2009) and National Seminar on Production System (SNSP-IX), Yogyakarta, Indonesia, November 2009.
  6.  “Ergonomic Assessment Factors in Reconfigurable Assembly Workplace ”,Ali, A.Y., Almanar I.P., S. Sahudin, Maideen, N.C., 2nd Asia Pacific Conference on Manufacturing System (APCOMS 2009) and National Seminar on Production System (SNSP-IX), Yogyakarta, Indonesia, November 2009.
  7.  Anthropometric Study Among Adults of Difference Ethnicity in Malaysia”, K. Karmegam,  M.Y. Ismail, S.M Sapuan, N. Ismail,  Shamsul Bahri,  S. Sahudin,  G.K. Mohana, P. Seetha, P. Tamil Moli, M.J. Hanapi, International Journal of Mechanical and Materials Engineering, 2009.
  8. A Study of Motorcyclist’s Riding Discomfort in Malaysia”, K. Karmegam,  M.Y. Ismail, S.M Sapuan, N. Ismail,  Shamsul Bahri,  S. Sahudin, P. Seetha, Journal of Engineering e-Transaction, 2009.
  9. The Investigation of Processing Parameter For ‘In Ladle Treatment’ of Ductile Iron Using High Sulphur Pig Iron”, K.B. Soon, M.R. Maarof, Z.A. Zakaria, S. Sahudin, M.A. Hanafiah, A.H. Ahmad, Idris M.H., National Conference in Mechanical Engineering for Research & Post Graduate Studies (NCMER ’10), ISBN:978-967-5080-95-1, Universiti Malaysia Pahang (UMP), May 2010.
  10. The Investigation of ‘In Ladle Treatment Method’ for High Sulphur Pig Iron To Produce Ductile Iron”, K.B. Soon, M.R. Maarof, Z.A. Zakaria, S. Sahudin, M.A. Hanafiah, A.H. Ahmad, Idris M.H., National Conference in Mechanical Engineering for Research & Post Graduate Studies (NCMER ’10), ISBN:978-967-5080-95-1, Universiti Malaysia Pahang (UMP), May 2010.
  11. The Programme Outcomes and Assessment: Some Flawed Understanding and Practice”, S. Sahudin, M.Y. Ismail, Conference on Developing Human Capital in Islamic Countries, Madinah, Kingdom of Saudi Arabia, December 2011.
  12. Proposition on a United Framework in Engineering Education Towards Measuring Program Outcomes (PO): From Course-PO Mapping to PO Performance and PO Attainment”, S. Sahudin, K. Sundaraj, M.Y. Ismail, International Conference & Carnival on Management System (InCAMS), Malaysia, November 2012.
  13. Proposition to Measure Program Outcomes (POs) in Engineering Education”, K. Sundaraj, S. Sahudin, M.Y. IsmailConference on Engineering & Technology: Driving for Strategic Changes, Madinah, Kingdom of Saudi Arabia, December 2013.
  14.  “Practical Framework: Implementing OEE Method in Manufacturing Process Environment”, Normariah Che Maideen, Shuib Sahudin, 2nd International Manufacturing Engineering Conference (iMEC2015) & 3rd Asia Pacific Conference on Manufacturing System (APCOMS2015) on 12 to 14 Dec 2015 at Swiss Garden Hotel, Kuala Lumpur, Malaysia.
  15. Practical Framework: Implementing OEE Method in Manufacturing Process Environment”, N.C. Maideen, S. Sahudin, N.H. Mohd Yahya, A.O. Norliawati (2015). IOP Conf. Series: Materials Science and Engineering. Volume 114 (2016).
  16. Synthesizing the Machine’s Availability in Overall Equipment Effectiveness (OEE)”,Normariah Che Maideen, Shuib Sahudin, Hasnida Ab Samat, Salina Busin (2017), 5th International Conference on Advances in Mechanical Engineering 2017 (ICAME2017), Krabi, Thailand, 16-18 August 2017.
  17. An Investigation on the Factors Affecting Teaching Effectiveness of Undergraduate Engineering Programme”, S. Sahudin (to be published)
  18. Factors Affecting Employability of Engineering Graduates: Evidence from Malaysia”, S. Sahudin (to be published)
  19. “Teaching Effectiveness and Employability of Engineering Graduates: An Empirical Study”, S. Sahudin (to be published)
  20. Performance Analysis of Mechanical Mating Interface for Reconfigurable Machine Tools”, Normariah Che Maiden, I.P. Almanar, S. Sahudin (to be published)

ACADEMIC BOOKS

  1. “Introduction to Complex Problem Solving (CPS): Concept & Characteristics” (to be published in 2020).
 
Scroll to Top